Stainless steel hospital disposal unit/slop hopper with sink and drainer

This stainless steel hospital disposal unit has the top turned down on all four edges and incorporates a wet area recess. A wash up bowl is positioned to side of the sluice hopper. HBN & HTM compliant. Unit can be mounted on either stainless steel cantilever brackets or Front leg supports give a working height of 900mm and have adjustable feet which can be screwed to the floor for extra stability.

HBN recommends

A disposal unit should be provided in clinical areas for the disposal of solid and liquid waste. Disposal units should have separate manual control of hot and cold water, and should be dispensed through lever action taps to avoid cross contamination. Taps should have an open nozzle and flow straighteners with minimal restriction. Hot taps should be at 55°c.