You can create your own bespoke NBS Specifications in seconds using our Washroom Specification Tool.
Create K32, N13 and N10 specifications for toilet cubicles, vanity units, ducting and pre-plumbed sanitaryware and brassware in a few clicks of the mouse.
Download your specification in NBS format on at a PDF or in Microsoft Word.
Launch the Washroom Specification Tool here.
All of our products have an NBS specification template, however, the quickest and easiest way to create an NBS spec is to use our Washroom Specification Tool.
Simply create a project, add products and download in an NBS specification format.
All specification templates can be found in the Downloads section of the website and on NBS Plus.
Find the Washroom Specification Tool here
At Bushboard, we have specifically designed a bespoke NBS specification writer for washroom products.
Create K32, N10 and N13 washroom specifications using our Washroom Specification Tool. This intuiative spec writer will allow you to download your washrooms specifications in NBS format and automatically link the clauses to each spec.
Launch the Washroom Specification Tool
Please email your enquiry to [email protected] with the following details:
Alternatively, you can call the office to discuss your requirements with our team 01536 533620.
For a copy of an existing quote, please email [email protected] with the following details:
Alternatively, you can call the office to discuss with our team 01536 533620.
All of our toilet cubicles are bespoke, made to measure (excluding Fastrack).
The standard overall height of our cubicles is 2000mm – this is measured from floor to top of the partition.
Our Manhattan, Definition, Paraline, Aero and HiZone toilet cubicles all have bespoke height floor to ceiling options.
Our education cubicles Tiny Stuff and Kids Stuff are lower heights as standard.
The floor clearance refers to the space between the bottom of the partition and the floor.
Depending on cubicle range, floor clearance can vary between 0mm (when a privacy skirting is used) to 150mm.
Our privacy skirting is a powder coated channel that runs between the bottom of the partition and the floor, adding extra privacy in between cubicles.
Privacy skirting comes as standard on our Manhattan and HiZone cubicles and can be added to both Quadro and Tough Stuff.
Solid Grade Laminate (SGL) is needed for shower cubicles. SGL is totally impervious to liquid and suitable for the most environments where strength and/or water resistance are needed. Read more.
Our benches are avaliable in three options;
Panels are available with push fit, lift off or hinged and lockable fixings.
For replacement parts and spares, visit our spares website www.bushboard-washrooms-spares.co.uk
Alternatively, email our Customer Services team with your enquiry [email protected].
Please include as much information as possible in your email, including (where applicable/known):
SGL is the perfect specification for very highly used areas such as airports and service stations which may be subjected to not only accidental damage but also potential deliberate misuse such as vandalism which could occur in places such as secondary schools. Read more.
High Pressure Laminate or HPL is the perfect specification for areas which are reasonably heavily used and may be subjected to accidental knocks and bangs, such as a primary school. Read more.
Melamine Faced Chipboard or MFC is the perfect material to specify in a dry area where the product will be reasonably well looked after and the cleaning regime is controlled – such as an office. Read more.
From a functionality point of view, when specifying real wood veneer, you should consider it to be suitable in a similar environment to those that MFC would be suitable for.
It’s only suitable for dry areas where the users will typically treat it well, it won’t be subjected to lots of accidental knocks and bangs, certainly won’t be subjected to deliberate damage and the cleaning regime will be well controlled.
SGL is a 13mm thick board created from hundreds of layers of craft paper impregnated with phenolic resin, compressed together to create a high density material. 1400kg/m² impervious to liquid, suitable for the most demanding environments where strength and/or water resistance are needed. SGL has polished radiused black edges as standard. Read more.
High Pressure Laminate or HPL is sheets of 1mm laminate bonded to an 18mm thick, 680kg/m² density moisture resistant chipboard core. The laminate sheet makes HPL highly impact resistant. Panels are supplied square edged with matching 1mm PVC lipping or with postformed vertical edges. Read more.
High performance Melamine Faced Chipboard 650kg/m² density, moisture resistant chipboard core with a melamine face. MFC has a finished panel thickness of 18mm and is supplied square edged with a matching 1mm PVC lipping. Read more.
Solid surface is manufactured from an advanced composition of minerals and acrylic polymer that delivers a seamless finish to vanity tops and is exceptionally hardwearing.
Real wood veneer is leaves of real wood laid on top of an MDF core. There is a huge variety of tree species to choose from, you can then specify crown cut or straight grain which is determined by the way the log is cut and also the finish such as a wax or lacquer. Basically, the world is your oyster when specifying a veneer.
As standard, Bushboard offer a range of 11 real wood veneers. Our real wood veneers are created using advanced techniques which achieve incredible consistency of colour and grain. Our veneers are produced from only eco-responsible and sustainable forests.
Manhattan, Paraline and Aero toilet cubicles are all available in real wood veneers.
Most cubicles have 34 laminate colour options.
Kids cubicles have an additional 3 laminate prints (HPL only).
Manhattan and Definition are both available in ColourCoat.
Manhattan, Paraline and Aero are available in real wood veneer.
For all the colours view our Colour Selector.
Bushboard have 3 digital laminate prints designed specifically for kid’s cubicles.
Bushboard Office: 01536 533620
Bushboard Customer Services: 01536 533667
Export: 01536 533620
Most of our washroom products have CAD blocks, you can download them here.
If you can’t find what you’re looking for, email your enquiry to [email protected] or call the office 01536 533620.
Most of our washroom products have BIM models, you can download them here.
Our delivery options are designed to offer complete flexibility across our washroom ranges
All of our panels are manufactured to your specific site dimensions and full CAD drawings are supplied with delivery.
4 week delivery – with drawings for approval
3 week delivery – without drawings for approval
48hr washroom: Our ‘off the shelf’ Fastrack washroom can be delivered within 48hrs. Shop the Fast Track range online.
For more information, visit our Delivery page.
Bushboard products can be delivered anywhere in the world.
Our dedicated International division is widely experienced in the specification and logistics of managing overseas washroom projects – large and small.
Our service includes extensive guidance on product specifications, detailed quotations, CAD drawings for approval and exceptional project management as well as logistic programming.
Please contact:
Gary Edkins, Export Manager
Jane Angus, Export Sales
Tel: 01536 533620
Fastrack is our off-the-shelf 48hour washroom system.
Fastrack cubicles and duct panels are available in MFC only.
Fastrack vanity units come with a HPL top and MFC underpanels.
For more information on Fastrack, email the office [email protected] or call us on 01536 533620.
Fastrack cubicles come with dark grey fittings and cubicles, vanities and ducting all come with 6 colour options.
Bushboard are a supply only company, however with our Preferred Installer Programme we can put you in touch with contractors and installers in your area who are completely familiar with the Bushboard product range.
Our Preferred Installer Training Programme ensures our UK wide network of installers are fully trained in our product range and can provide you with a first class service, meaning less hassle for you and often faster installation.
If you have a new washroom installation project and would like details of installers in your area call us on 01536 533620.
LRV stands for Light Reflectance Value which is a number given to every colour.
The Building Regulations 2000 states:
Contrast visually, when used to indicate the visual perception of one element of the building, or fitting within the building, against another means that the different in light reflectance value between the two surfaces is greater than 30 points. [Approved Document M page 16]